How to Log In

• Accounts must be created by REMC1 directly on the Digital Watchdog VMAX NVR

• To log in, you need to go to: myDW Pathfinder

  • The Host will be provided to you by REMC1

Live Monitoring

• Once you have logged in, you will see all of the active cameras

• To enlarge the view of a camera, double-click on it - repeat to minimize it again

• To change the number of cameras you can view at one time:

  • In the lower left, click on the “Mode” button

  • Along the right edge a small menu will display

  • Select 1, 4, 9, or 16 cameras - You cannot rearrange the camera layout/order

  • The left and right arrow on this same menu will scroll through the cameras

  • Clicking on “Mode” again will hide this menu

Viewing Motion Recordings

• In the lower left, click on “TimeTable”

• A stripe will show along the bottom of the screen

• From here you can either select a day and time along the strip or click on the “Calendar Search” in the lower right

• The “Site Sync” button in the lower left will ensure the time selected is the same across all cameras that are currently displayed

• To search just a single camera, double-click on it to enlarge it

• When done simply click the “LIVE” button in the lower right of your screen