Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
General Info
- Models: 485wi ,585wi and 685wi
- The 685wi is networkable and does not require any drivers.
- 485wi and 585wi require Epson Easy Interactive tools downloadable here for win10 64bit (they both use the same version): https://epson.com/Support/Projectors/BrightLink-Series/Epson-BrightLink-485Wi/s/SPT_V11H452520W?review-filter=Windows+10+64-bit
- Also attached to this wiki (but check for newer versions and update).
- To use the Pen with the projector you need a USB cable from the projector to the computer and the Easy Interactive Tools. The driver should be installed with easy interactive tools.
- The pen would be used on the whiteboard and the projector would sense the pens position via IR (Mark L says sunny days caused flaky performance) and send info back to the computer via USB.
- The Easy Interactive Tools also had smartnotebook like features.
- Smartnotebook 10 was historically used. It worked in win7. License and installer will be attached.
- They should get a newer version and license it. It may not work with windows 10. Would have to be tested.
EIT_4.221.exe
license.txt.txt
sp1nbsbsetup.exe