Conference Room A Pyle Microphone System

Owned by Karl Stegeman
Last updated: Apr 18, 2024
2 min read

Pyle Board Meeting Microphone System

 

Pyle Mic PowerMuteVolume_Confluence.png

 

  1. POWER ON the Black Pyle Microphone head end box. Ensure the Black Pyle Microphone head end system is powered on. It’s located under the podium desk. The power button is on the front.

 

  1. On each Pyle mic: Hold the Power button for 3 seconds to turn it on.

    1. Do not select the Up and Down buttons, this will adjust the RF which has already been set.

 

  1. Adjust microphone volume using the knob on the back. (Please leave it alone unless there's a significant issue. They should already be adjusted)

 

Pyle Mic Mute Function_Confluence.png

 

  1. To mute your microphone TAP the Power button and the green ring around the microphone will become blank. To unmute, select the Power button again and the ring will light up green again.

  2. When done with the system TURN ALL MICROPHONES OFF by holding down the power button for three seconds. The digital display will go blank when off. Failing to turn the microphones off will result in dead batteries.

  3. Optional but encouraged: Turn off the large Black Pyle Microphone head end box located under the podium.