Page Comparison

...

1. Once logged in to the Access Control Manager, select the "Schedules" button from the settings drop down menu. 

   • 

2. You will now see a listing of schedules. Select the one for your district. 

   • 

3. You should now see the area to edit the schedule. 

   

4. You can create complex schedules in this section. For each line, you can select a day as well as a time. You can also create mutimulti-line schedules that can do more complex things. However, there are a few important things to remember: 
   1. Under "Mode" there are 3 options (on, off, and scan). :
      1. "On" means the schedule will
      ignore everything below and be on 24/7.
      1. ignored and the door will remain unlocked 24/7 – scanning in is unnecessary
      2. "Off" means
      off 24/7.
      1. the schedule is ignored and the door will remain locked 24/7 – scanning in is the only way to enter
      2. "Scan" means to follow the
      settings below.
      1. schedule

   2. Ending times trigger at the end of the minute specified, if you put 13:15 it won't end until 13:15:59. If you want it to end exactly at 13:15 you should specify 13:14

   3. All of the settings are in 24 hour time. 
5. When you are finished, click save to apply your changes.