...

1. Verify the lock logo is green. This indicates the system is ready to be armed.
   1. 
2. Press the ★ icon
   1. Image Modified
3. Select "Arm with delay"
4. When the timer starts, exit the building.
   1. 

Alarm Not Ready to Arm

If the alarm will not enter a ready state, follow the steps below:

1. To view the issue, select "View Pts". This stands for view points.
   1. 
2. You should now see a list of faulted points. Scroll through them with the left and right arrows.
   1. 
3. Go to the area in the building with the issue and resolve the fault. Once cleared the screen should look like this:
   1. 
4. You may now arm the alarm.

Disarming the Alarm

Alarm will disarm automatically when an exterior door is opened using the card system. 

Resetting Alarm After Fault

If the alarm goes off, follow this procedure: 

1. Silence the alarm. Touch the red alarm icon.
   1. Image Modified
2. Clear Fix the fault problem in the building (Close open door, papers waving in front of motion sensor, ect)
   1. Image Modified
3. Once the system is disarmed, view the events with the icon in the upper left hand corner.
   1. Image Modified
4. Once the fault is cleared, remove the fault with the clear button on main screen.
   1. Image Modified
5. Once cleared the system should return to:
   1. Image Modified