REMC1 staff: This page serves as a basic user guide. Most likely you need: Bosch Alarm Systems since it contains administrative details. 

Glossary of Terms

• Point(s)
  • A point is a grouping of sensors in one area of the building. If a point has a fault, something is tripping a sensor in that area.

Arming the System

To arm the system please do the following:

1. Verify the lock logo is green. This indicates the system is ready to be armed.
   1. 
2. Press the ★ icon
   1. Image Modified
3. Select "Arm with delay"
4. When the timer starts, exit the building.
   1. 

Disarming the Alarm

Alarm will disarm automatically when an exterior door is opened using the card system. 

Resetting Alarm After Fault

If the alarm goes off, follow this procedure: 

1. Silence the alarm. Touch the red alarm icon.
   1. Image Modified
2. Clear the fault in the building (Close open door, ect)
   1. Image Modified
3. Once the system is disarmed, view the events with the icon in the upper left hand corner.
   1. Image Modified
4. Once the fault is cleared, remove the fault with the clear button on main screen.
   1. Image Modified
5. Once cleared the system should return to:
   1. Image Modified