...
Download and install the Forticlient installer available here: FortiClientOnlineInstaller_5.4.0.0780.exe
Once the Forticlient installer is complete you must import the config file which is linked here (You must call REMC1 SupportNet to download the config file): WUPHD IpsecVPN/wiki/spaces/NET/pages/16909855
- You MUST DELETE THIS CONFIG FILE WHEN DONE. It contains a preshared key. If its leaked the ipsec tunnel will not be secure and will need to be changed.
Once the Forticlient is installed Start it up. You will find it in your start menu->All Programs->Forticlient
Once started go to file->settings click restore button and select the config file you downloaded above then click the OK button until you're back at the Forticlient login screen.
- Now to connect Select WUPHD-IPSEC from the drop down in the center of the window.
Fill in your user/pass for connecting to the VPN (this user/pass is the same user and password you log into your work computer must be a member of the VpnUsers group on the file server (Kate, Barb Maronen and Peter are (including IT staff).
- Click Connect. It will show you as connected shortly and minimize the window.
- NOTE: All your internet traffic will now flow over this VPN so disconnect the client immediately when you are done.
...
Under Control-Panel -> Go to Networking then click the plus sign in the bottom left of the window
- In the drop down select vpn
- Select Cisco VPN as the VPN type.
- For the settings the Address is : wuphdvpn.remc1.net
Fill in your user/pass for connecting to the VPN (this user/pass is the same user and password you log into your work computer must be a member of the VpnUsers group on the file server (Kate, Barb Maronen and Peter are (including IT staff).
- Now click the Authentication Settings box. A new window pops up.
- The Group Name is: WUPHDIpsecClient
Secret: The shared secret is known by REMC1 support and obtainable from REMC1 Staff (its in LastPass under WUPHD).
- Click the OK button (after entering in the Shared Secret and Group Name.
- Now at this window (the main vpn config window) OPTIONAL: Click Show VPN Status in Menu Bar. (This box will then appear on your top menu bar close to the clock and look like a box with five vertical lines as of OSX 10.4 to 10.10).
- Click apply (making sure your Account name and Password are typed in).
Now to connect either select the VPN from the drop down box (if you checked the option "Show VPN status in Menu Bar) OR Go to settings->Networking->click on the vpn in the left pane and then in the right pane select connect.
...
ON the IOS/Iphone device go to Settings->General->VPN
- Click "Add VPN Configuration" at the bottom of this screen
- Select IPsec at the top
- For description type whatever you want (WUPHDIPSEC etc..etc..)
- Server: 208.68.27.64
Account: (this user/pass is the same user and password you log into your work computer must be a member of the VpnUsers group on the file server (Kate, Barb Maronen and Peter are (including IT staff).
- Password: Same password you use to log into a computer at WUPHD
- Group Name: WUPHDIpsecClient
Secret: The shared secret is known by REMC1 support and obtainable from REMC1 Staff (its in LastPass under WUPHD).
- IMPORTANT: CLICK SAVE VPN CONFIGURATION at the bottom of this window. Anytime you make changes you MUST CLICK THIS BUTTON or all settings are lost.
- Now after clicking save changes you'll be back at the main vpn list.
...